FIAT 500X wheel size chart serves as the fitment guide when you need to replace the OEM wheels or upgrade the vehicle with an aftermarket option. It helps figure out the possible stock and custom offset rage, wheel width parameters, and the FIAT 500X bolt pattern that is important for the correct fitment.
For your convenience, we have grouped the FIAT 500X wheels specs by generation. Scroll down the page to find the necessary year of production and check out the wheel size.
FIAT 500X Wheel Size & Specs
FIAT 500X Wheel Size
2019Shop for Tire & Wheel Packages at Tire Rack.
| Stock Rim Sizes Range | x – x Hubcaps  |
FIAT 500X Wheel Size
2018Shop for Tire & Wheel Packages at Tire Rack.
| 500X Bolt Pattern (Lug Pattern) | PCD 5x110 See Adapters |
| Stock wheel offset | 35 to 40 mm Wheel Spacers |
| Center bore (hub bore) | 65.1 mm Use Hub Centric Rings |
| Thread size (Lug Nut Size) | M12 x 1.25 Lug Nuts |
| Stock Rim Sizes Range | 16x6.5 – 18x8.0 Hubcaps |
| Tire sizes |
FIAT 500X Wheel Size
2017 2016Shop for Tire & Wheel Packages at Tire Rack.
| 500X Bolt Pattern (Lug Pattern) | PCD 5x110 See Adapters |
| Stock wheel offset | 35 to 45 mm Wheel Spacers |
| Center bore (hub bore) | 65.1 mm Use Hub Centric Rings |
| Thread size (Lug Nut Size) | M12 x 1.25 Lug Nuts |
| Stock Rim Sizes Range | 16x6.5 – 19x8.0 Hubcaps |
| Tire sizes |
Bolt pattern of your FIAT 500X
FIAT 500X stud pattern - Pitch Circle Diameter (PCD) defines the diameter of the imaginary circle drawn by the centers of the wheel lugs and describes the number of the lug holes incorporated by the rim. How to change bolt pattern? Use Adapters
Stock Wheel Offset
The space between the hub mounting surface and the wheel center of 500X wheels. If you need a different offset use Wheel Spacers
Center Bore (Hub Bore)
The hole in the middle of a rim that exactly matches the hub diameter. It is located at the back of the wheel and as the car's hub goes into this hole it ensures the wheel gets centered correctly. Stock 500X wheels have a perfect centerbore fit with the hub. How to fit rims with larger centre bore? Use Hub Centric Rings
Custom Offset Range
Is calculated from the data of modified FIAT 500X that switched to custom wheel size preserving the proper driving capabilities of the vehicle.
Thread Size
Lug Nuts
Rim Sizes Range
Gives an idea about the maximum and minimum allowable limits of the wheels diameter and width matching the specific vehicle. Try Hubcaps
Custom Rim Sizes Range
Shows the lower and upper limits of the rims the vehicle can incorporate in contrast to the manufacturer's specs. Sometimes it happens that you are not happy with your stock wheels and would like to have something else. Choosing the right aftermarket wheels
Tire Sizes
Scale from the minimum to the maximum available options of the wheel dimensions that may fit FIAT 500X
Advantages and disadvantages of the different kinds of wheels. It will help you to select your FIAT 500X wheel size:
FIAT 500X Bigger Wheels
Advantages
- – Have great handling capability.
- – The fact that it has less balancing on the rubber casing enhances your car’s stability.
- – The easiest way to get better ground clearance to your 500X
- – Comes with added braking capability.
- – Can comfortably handle greater speed as well as weight limits.
Disadvantages
- – Very expensive
- – The fact that they are big means that comfort is not maximized
- – Tend to wear out very quickly
FIAT 500X Smaller Wheels
Advantages
- – The comfort aspect is maximized
- – Relatively cheap
Disadvantages
- – Poor handling capability
- – Has a relatively ugly look
- – Weak performance due to their small sizes
We strongly recommend always use the wheel dimensions and bolt pattern that were stipulated by the manufacturer.
Remember that using aftermarket wheels will affect the fuel consumption rate of your FIAT 500X, and the speedometer measurements may not reflect the actual speed of your driving. Such a fate can even see you getting a fine in different regions.
FIAT 500X specs
| 500X wheels |
| 500X tire size |
